Simoco SDM730
Simoco SDM730
The SDM730 should be configured using the Simoco “FPP” application, Assuming the SDM730 is configured for your channels and application first read the radio settings and then:
Embedded Files
In the Settings side bar, choose Conventional | Accessories
Add the following:
Write the settings back to the radio
Xebro Settings*
Xebro Settings*
In the Xebro Settings Page, set the Signal Settings to:
RF Trigger Active Low (HiZ)
Zello Triger Active Low
*Requires Firmware build March 26 2025 or later
Connection
Connection
Connect using the supplied cable
Page updated
Google Sites
Report abuse